BRAND NEW HANNA HI 98302 TDS/ CONDUCTIVITY METER RANGE Upto 10,000ppm
DESCRIPTION:
DiST testers are reliable, pocket-sized instruments that will give you quick and accurate readings of conductivity and TDS. This popular line of Dissolved Solids Testers have been redesigned to offer a host of improvements. The casing has been modified to provide increased strength, a better fit for holding and a large LCD for easy viewing. The graphite sensors provide better repeatability since they do not oxidize. The casing has been engineered to allow air bubbles to escape. The temperature sensor is exposed to provide faster response time.HI 98300, HI 98301 (DiST 1) and HI 98302 (DiST2) perform TDS measurements, while HI 98303(DiST 3) and HI 98304 (DiST 4) provide conductivity readings.If calibration is necessary, simply submerge the electrode tip into calibration solution and adjust the trimmer on the side of the tester.
SPECIFICATION:
Range:
10.00 ppt (g/L)
Resolution:
0.01 ppt (g/L)
Accuracy:
±2% F.S.
TDS Factor:
0.5
Calibration Solution: (not included)
HI 70038
Calibration:
Manual, 1 point
Probe:
HI 73302
Temperature Compensation:
Automatic, 0 to 50°C (32 to 122°F)
Battery Type / Life:
4 x 1.5V / approx. 200 hours of continuous use
Environment:
0 to 50°C (32 to 122°F);
RH max 95%
Dimensions:
175 x 41 x 23 mm (6.9 x 1.6 x 0.9")
Weight:
95 g (3.4 oz.)
HI 98302 (DiST 2 with TDS factor = 0.5)
is supplied with protective cap, screwdriver, batteries and instructions.
